General Purpose Forceps and Tweezers
Available in a variety of sizes, styles, and configurations to support specific handling requirements, including pointed, blunt, rounded, curved, angled, or flat tips; plain or serrated gripping surfaces; scissor-style handles; self-closing designs; alignment guide pins; and protective foam, silicone, or PTFE-coated surfaces to enhance grip and minimize contamination or damage to sensitive components and materials.
Typical applications include manipulation of microscope coverslips, filter papers and discs, electronic components, precision mechanical parts, and other small or fragile items in controlled, industrial, research, and manufacturing environments. Excludes surgical, dissection, and other medical forceps intended for clinical procedures.
Electron Microscopy Sciences Rubis Wafer Tweezers Style 43LB-8 Peek, 138 mm
For wafers handling. Made of PEEK an ESD safe soft, conductive fiber, with heat resistance up to 250°C. Clean-room compatible.
OAL: 138 mm
Width: 27 mm
Sklar Instruments Forceps, Bipolar Jansen Bayonet Forceps, Sklar 1mm, Stainless Steel / Non-Conductive Coating, EA.
Forceps, Bipolar Jansen Bayonet Forceps, Sklar, 1mm, Stainless Steel / Non-Conductive Coating, Lifetime warranty against all manufacturer defects.
Newcomer Supply Custom Embedding Forceps, 18cm, Straight Smooth Tip, Stainless Steel
Smooth Tip, Standard Grade Stainless Steel
Electron Microscopy Sciences EMS Fiber Tip Tweezers Style 248, Type RF-PET/GF30, 130 mm
The handles are made from Antimagnetic Steel and tips are synthetic fiber. Temperature Resistance: 375 degree F (190 degree C). Non Conductive Plastic RF tips of polyethylene terephtalate (PET) with 30 wt% glass fiber have high tensile and flexural strength. Good chemical resistance and low moisture absorption. High temperature capability.
Material: RF-PET/GF30
OAL: 130 mm
Tip width: 10 mm
Tip thickness: 1.8 mm
:
Electron Microscopy Sciences Rubis Reinforced Plastic Tweezers Style KR, 120 mm OAL
Made of PBTP (Polybutylenterephthalate) with 20% fiber-glass, the tweezers are resistant to chemicals and acids, highly isolating, and resists temperatures up to 200 degree C.
Tips: 120 mm
OAL: Flat points, flat-contact-tips
Electron Microscopy Sciences Wafer Tweezers Fluorocarbon with Pin, 165 mm
Plastic wafer tweezers are low cost and designed for ease of use.
Electron Microscopy Sciences Tweezers Protection Cap, Polyethylene, 12/pk
These caps which are in the shape of the tweezer tip are made from Polyethylene and are used to protect the tweezers tips from damage.
Electron Microscopy Sciences EMS Tweezers Style 2A, 134 mm
These tweezers have Zirconia ceramic precision tips. The surface resistively is 10E12 ohm. Contamination free, high temperature (1000 degree C). Aluminum handles. Lightweight.
OAL: 134 mm
Tips: Ceramic tip length 35 mm, tip width 2 mm
Electron Microscopy Sciences Wafer Tweezers Linear Polyethylene, Extra Wide, 113 mm
Plastic wafer tweezers are low cost and designed for ease of use.
Electron Microscopy Sciences EMS Wafer Tweezers Style 2W
These tweezers are especially designed for the handling of delicate and fragile silicon wafers, scintillation discs, glass slides, coverslips etc. Made from antimagnetic/anti acid steel with a very smooth surface and a non-glare finish.
Tip Width: 6.5 mm
Depth: 5.0 mm
Tip Lip: 2.5 mm
Offset: 4.0 mm
Electron Microscopy Sciences EMS Syntheric Fiber Tweezers Style 709, 116 mm OAL
Continuous use temp to 150 degree C. High purity, chemical resistant, ESD safe. Clean room and medical devices approved with low extraction value. Made from SV plastic based on polyvinylidene fluoride (PVDF) for good mechanical strength and toughness, smooth surface. Excellent chemical resistance to most aggressive substances.
OAL: 116 mm
Electron Microscopy Sciences EMS Syntheric Fiber Tweezers Style 710, 116 mm OAL
Continuous use temp to 150 degree C. High purity, chemical resistant, ESD safe. Clean room and medical devices approved with low extraction value. Made from SV plastic based on polyvinylidene fluoride (PVDF) for good mechanical strength and toughness, smooth surface. Excellent chemical resistance to most aggressive substances.
OAL: 116 mm
Electron Microscopy Sciences EMS Wafer Tweezers Style 4WF
These tweezers are especially designed for the handling of delicate and fragile silicon wafers, scintillation discs, glass slides, coverslips etc. Made from antimagnetic/anti acid steel with a very smooth surface and a non-glare finish.
Tip Width: 12.0 mm
Depth: 9.0 mm
Tip Lip: E:2.5 mm
Offset: 4.0 mm
Electron Microscopy Sciences Wafer Tweezers Linear Polyethylene, 113 mm
Plastic wafer tweezers are low cost and designed for ease of use.
Electron Microscopy Sciences EMS Super Thin and Long Tweezers Style SS, 140 mm OAL
These long and slender tweezers work well in multiple precision applications and are especially well suited for working near heat sources. They are made from SA low carbon austenitic steel that is non magnetic and anti acid and is ideal for use where corrosion resistance and toughness are primary requirements. Long and narrow straight tips.
OAL: 140 mm